Werbung
Accessories
Template Follower
The template follower enables template and pattern routing on workpieces. To
use the template follower remove the two countersunk screws from cut-out of
the base plate. Lay the template follower into the cut-out. Make sure the
template follower faces downwards (arrow) and secure it with the countersunk
screws. Lay the router with the template follower against the template.
Switch on the router. Loosen retaining lever (14) and slowly lower the router to
the workpiece until the adjusted depth-of-cut is reached. Re-tighten the
retaining lever (14).
Lead the router with projecting template follower along the template by
applying light sideward pressure.
Templates can be purchased
separately or you can design
your
own
templates.
For
detailed
information
on
templates refer to a wood-
working book.
21
Werbung
