IKEA LAGAN Bedienungsanleitung Seite 8

ENGLISH
Installation
To make the product ready for use, be careful that
the electrical wiring and plumbing are appropriate by
referring to the information in the user manual. If not,
call a qualified electrician and plumber and have the
necessary arrangements made.
AWARNING: The manufacturer is not liable for
damages caused by operations by unauthorized
persons. To avoid shaking, place the product on a flat
surface.
AWARNING: During the installation, the power plug
of the product should not be plugged in. Otherwise,
there is a danger of death or serious injury!
AWARNING: If the doorway of the room to where the
product will be placed is so narrow that the product
cannot pass through, pass the product by turning it to
side; otherwise, call an authorized service.
Do not expose the product to direct sunlight and
•
do not store it in humid place.
Do not install the product where the temperature
•
drops below 10 °C.
Before you start the refrigerator,
Check the following before you start to use your refrig-
erator:
Clean the interior of the refrigerator as
1.
recommended in the "Maintenance and cleaning"
section.
Connect the plug of the refrigerator to the wall
2.
socket. When the fridge door is opened, fridge
internal lamp will turn on.
When the compressor starts to operate, a sound
3.
will be heard. The liquid and gases sealed within the
refrigeration system may also give rise to noise, even
if the compressor is not running and this is quite
normal.
Front edges of the refrigerator may feel warm. This
4.
is normal. These areas are designed to be warm to
avoid condensation.
ELECTRICAL CONNECTION
AWARNING: Do not make connections to the
extension cords or multiple sockets.
AWARNING: Damaged power cable must be replaced
by an Authorized Service.
AWARNING: When positioning the appliance, ensure
the supply cord is not trapped or damaged
IKEA of Sweden will not be liable for any damages
•
that occur when the product is used without
grounding and electrical connections that are
according to national regulations.
The power cord plug must be easily accessible
•
after installation.
Connect your refrigerator to an outlet with a
•
ground line with 220-240V/50 Hz voltage. Plugs
should have a 10-16 A fuse.
CLIMATE CLASS AND DEFINITIONS
Please refer to the Climate Class on the rating plate
of your device. One of the following information is
applicable to your device according to the Climate Class.
SN: Extended Temperate Climate: This cooling device
is designed for use at ambient temperatures between
10 °C and 32 °C.
N: Temperate Climate: This cooling device is designed
for use at ambient temperatures between 16°C and
32 °C.
ST: Subtropical Climate: This cooling device is designed
for use at ambient temperatures between 16°C and
38°C.
T: Tropical Climate: This cooling device is designed for
use at ambient temperatures between 16°C and 43°C.
8