IKEA FORSNAS Bedienungsanleitung Seite 6

ENGLISH
Operation
Control panel
10 sec 5 sec
A B 5
Power button
A
Temperature setting button
B
1 -24°C (+2°C) indicator
2 -20°C (+4°C) indicator
3 -16°C (+6°C) indicator
4 Super mode indicator
5
Fridge mode indicator
Notes:
• The negative temperatures are applicable when
the appliance is in freezer mode.
• The positive temperatures in the parentheses are
applicable when the appliance is in fridge mode.
• Do not use sharp objects to operate the control
panel. They can scratch or damage the control
panel.
Switching on
When you connect the mains plug to a power socket,
the appliance switches on and starts operating.
Display
• After you plug in the appliance, it emits a ring
and all indicators light up for 3 seconds. Then all
indicators turn off except the -20°C (+4°C) indicator
2
and the appliance starts operating in freezer
mode.
• In case of a known failure, the corresponding
indicators will blink.
Indicator status
The -24°C and -20°C
indicators ( and ) are
1 2
blinking.
The -24°C and super
mode indicators ( and
1
) are blinking.
4
The -24°C and -16°C
indicators ( and ) are
1 3
blinking.
The -20°C and super
mode indicators ( and
2
) are blinking.
4
Note: If there is a flashing failure, please call the
service center.
1 2 3 4
Fault
Compartment
temperature sensor failure
Ambient temperature
sensor failure
Defrosting temperature
sensor failure
Communication failure
To download the full version visit www.ikea.com
Changing the working mode
• You can set the appliance to work in fridge or
freezer mode via the control panel.
• When the appliance is in freezer mode, the fridge
mode indicator is off. When the appliance is in
5
fridge mode, the fridge mode indicator
up.
• When the appliance is plugged in for the first time,
it enters freezer mode. Keep it in freezer mode or
set to fridge mode, as needed. After 30 minutes
in the selected mode, the memory function is
activated. If the power is cut and then switched on,
the appliance enters the last-set working mode.
If the power cuts prior to 30 minutes in a selected
mode, the appliance will return to the default freezer
mode when switched on. To change the working
mode, press and hold temperature setting button
for 5 seconds.
Setting the temperature
Recommended temperature for freezer mode: -20°C
(factory setting)
Recommended temperature for fridge mode: +4°C
(factory setting)
• You can set the temperature of the compartment
via the control panel.
• When the appliance is plugged in for the first time,
it sets the temperature to -20°C. When you plug
in or switch on the appliance again, it sets the
temperature to the last set temperature.
To set the temperature, press the temperature setting
B
button one or more times until the indicator for
the desired set temperature blinks. The indicator will
be steady in 5 second and the appliance will operate
according to the new set temperature in 15 seconds.
-24°C (+2°C) -20°C (+4°C)
Tips:
• The lower the set temperature, the longer you can
safely store your food and the more electricity the
appliance consumes.
• The higher the set temperature, the quicker your
stored food decays and the less electricity the
appliance consumes.
Super cooling mode (only for fridge mode)
Note: The Super cooling function is specifically
designed to rapidly cool down newly placed food in
the fridge compartment. If you have a significant
amount of warm food, such as after grocery
shopping, it is recommended to activate the Super
cooling function. By doing so, you can ensure quick
6
lights
5
B
-16°C (+6°C) Super mode