Velleman VelLight LEDC13 Bedienungsanleitung Seite 5

Step 5 – Reconnect the connector cable
 Make sure the connector is fully opened.
 Insert the cable and close the connector.
You can now close the touch panel.
5. Wiring
Wire the controller as follows:
6. Operation
On/Off
To turn the lights on or off, short press
To set the dimmer, long press
7. Technical Specifications
power supply
maximum load
PWM frequency
external dimensions
internal dimensions
weight
caution
V. 01 – 28/03/2013
LEDC13
.
12 - 24 VDC
3 x 4 A
± 900 Hz
86 x 86 x 13 mm
57 x 65 x 24 mm
150 g
output current of power supply must not
exceed 3 x 4 A.
Suitable power supplies:
144 W / 12 V or 288 W / 24 V.
5
.
©Velleman nv