Werbung
Verfügbare Sprachen
Verfügbare Sprachen
35. Delay Short
36. Delay Long
|
37. Echo Short
|
38. Echo Long
The stereo delay and echo effects offer independently variable
left and right channel delays.
Left Channel Delay (Lch DLY):
0.1 — 500 milliseconds in "delay" programs
0.1 — 250 milliseconds in "echo" programs
Sets the time between the direct sound of the instrument and
the first repeat heard from the left channel.
Left Channel Feedback Gain (Lch Е.В): -99% — +99%
Sets the amount of the left-channel delay signal fed back to
the input of the processor. The higher the feedback gain
setting, the greater the number of delayed repeats pro-
duced.
Right Channel Delay (Rch DLY):
|
0.1 — 500 milliseconds in "delay" programs
0.1 — 250 milliseconds in "echo" programs
Sets the time between the direct sound of the instrument and
the first repeat heard from the right channel.
Right Channel Feedback Gain (Rch F.B): -99% —
+99%
О
|
Sets the amount of the right-channel delay signal fed back
to the input of the ргосеззог. The higher the feedback gain
setting, the greater the number of delayed repeats produced.
High Frequency Feedback (HIGH): x0.1 — х1.0 |
Controls feedback in the high-frequency range. The high-
frequency feedback is reduced as the value of this parame-
ter is decreased.
19
GEP50 GUITAR EFFECT PROCESSOR
39. Stereo Flange
|
This effect produces a pleasant "swirling" sound which can |
effectively thicken and add warmth to the sound of an instrument.
The flanging effect is produced by varying the delay between two
identical signals, thus producing a complex varying "comb filter"
effect.
|
Modulation Frequency (MOD. FRQ): 0.1 Hz — 20 Hz
Sets the speed of modulation, and hence the rate at which |
-the effect varies.
Modulation Depth (MOD. DEPTH): 0% —
100%
Sets the amount of delay time variation, thus adjusting the
depth of the effect.
Modulation Delay (MOD. DLY): 0.1 — 100 millisec-
onds
|
|
i
|
This sets the basic delay time from the initial direct sound
to
the beginning of the flange effect.
—
Feedback Gain (Е.В. GAIN): 0% — 99%
о.
Determines the amount of flange signal which is fed back to |
the input of the processor for further modulation. More
feedback increases the overall complexity, "strength" and :
decay time of the effect.
MOD, DEPTH
(аВ)| DIRECT
SIGNAL
|
МА RIL)
мор. ру
(TIME)
.
Werbung
