Silvercrest SDBS 2400 A1 Kurzanleitung Seite 12

3) Fill the water tank 0 . Do not fill above the MAX marking in the water tank 0 .
4) Close the water tank filler cap 9 .
5) Insert the plug into a mains power socket .
Ironing without steam
CAUTION! PROPERTY DAMAGE!
► Check the care instructions on the labels in garments to see if they are suit-
able for being ironed, and at which temperature setting .
► If the clothing care instructions forbid ironing (
be ironed . Ignoring this warning could lead to permanent damage to the
clothing item .
NOTE
Always set the temperature control 2 to the lowest level (min) before switching
the appliance on . The symbols on the temperature control 2 correspond to
the following settings:
1) Press the On/Off button t to turn the appliance on . The indicator lamp
integrated in the On/Off button t lights up and the "max" steam indicator
lamp w flashes .
2) Rotate the temperature control 2 to set the required ironing temperature .
3) The heat-up indicator lamp 3 lights up during heating . As soon as the heat-
up indicator lamp 3 goes out, the set temperature has been reached and
you can start ironing .
4) Put the iron down on the base station placement area 5 after ironing . Set
the temperature control 2 to "min" .
SDBS 2400 A1
Symbol
min -
( - max)
), the garment must not
Temperature
Material
Synthetics
Silk
Wool 100 - 160 °C
Cotton/linen 140 - 210 °C
(approx .)
70 - 120 °C
70 - 120 °C
GB │ IE 9
│
■