Sony DSC-1024HD Bedienungsanleitung Seite 41

'esetting the data to the factory preset levels
here are three options for resetting the adjustment data to the
ictory preset levels.
iEOM RESET: Resets ZOOM, H/V SIZE and H/V CENT
currently in use.
'OLOR RESET: Resets CONTRAST, PHASE and CHROMA
currently in use.
Resets all usesadjustment items to the factory
preset data and clears the memory contents.
\LL RESET:
'he operation procedures are the same for the three options.
| Press the MENU button.
The MENU 1 screen appears.
MENU 1
»MEM LOAD
MEM SAVE
GEOM RESET
MENU
COLOR RESET
ALL RESET
INDEX NO.
LANGUAGE
USE:QQGENTER NEXT:MENU
' Press the CENT 0/0 button to move the cursor (P) to
GEOM RESET, COLOR RESET or ALL RESET, and press the
ENTER button.
+ ALL RESET
(4) ENTER CANCEL
EXECUTE
USE: BLENTER CANCEL: MENU
3 Press the CENT 0/6 button to move the cursor to
EXECUTE, and press the ENTER button.
The adjustment data are reset to the factory preset levels.
To cancel resetting
*ress the MENU bittton, or select CANCEL in step 3 above and
yress the ENTER button.
'
Using the test pattern
ysy{6u3
TEST PATTERN button
You can use the built-in test patterns to adjust the monitor or
prejector screen.
Press the TEST PATTERN button.
Each time you press TEST PATTERN, the following test
patterns appear in sequence.
Hatch % Box % Color bar > Gray scale > OFF (input signal) >
Hatch 9 ... Example: Hatch
4 PATTER!
The selected test pattern name is displayed on the screen for
about 3 seconds.
To restore the normal screen
Press the TEST PATTERN button repeatedly until no test
pattern is displayed. Pressing the ON/OFF switch, INPUT
SELECT buttons or OUTPUT FORMAT button also restores
the normal screen.
When the test pattern is displayed, only the ON/OFF switch,
and the INPUT SELECT, OUTPUT FORMAT, MENU and
CENT ¢/% buttons will function.