AEG CHDF 6260 Montage- Und Gebrauchsanweisungen Seite 66

/j\ Warning
• Failure to observe the instructions on cleaning the unit and
changing the filters will cause a fire hazard. You are therefore
strongly recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.
Changing the light bulb(s)
• Disconnect the unit from the mains power supply.
• Unlock the lighting cover (D) by twisting the bolts to the left and fold
down the bulb cover. Fig. 4.
Replace the old light bulb(s) with a new light bulb of the same kind.
• Close the bulb cover and relock it by twisting the bolts to the right.
• If the light does not come on, make sure the bulb has been inserted
correctly before contacting your local Service Force Centre.
Special accessories
Charcoal filter KF 8
Front panel M BF6060-m
Front panel AL BF6060-al
Finishing strip*
Clips for finishing strip (3x)*
E-Nr. 942 118 648
942 120 646
942 120 647
ET-NR.: 502 426 420 02
ET-NR.: 502 302 940 06
ET-NR. contact our Service Force Centre