Bosch SpotSee Bedienungsanleitung

Sp9tSee
1
Quick Start Guide
EN
The full description
www.spotsee.io/impact/spotbot-ble
Connection to SpotBot
1. Start the SpotBot
"SpotBot BLE" in your
Play Store free of charge.
2. Activate Bluetooth
3. To activate the SpotBot
the device from 0.3
4. To find the activated
5. Choose the SpotBot
by tapping "Pair".
Configure the SpotBot
NOTICE
No SpotBot
You cannot configure
is impossible to reset the PIN; even at the factory.
Always make a note
NOTICE Convention
For email and device
These characters are
0.3 - 1.5 s
II
of the SpotBot BLE is available
BLE (Figure 1)
BLE App. You will find the App
Apple App Store or Google
on your smartphone.
BLE press the button
to 1.5 seconds.
SpotBot BLE tap "Search".
BLE and confirm the connection
BLE (Figure 2)
BLE Access!
the SpotBot BLE without a valid
of the PIN and store it on a safe place.
for Characters
name only defined characters
2
3
To configure
I.
app(e-mail
at:
logging
2. To start
and disconnect".
To start logging
desired,
the SpotBot
blinks three
on
has started.
Data Transfer
Connect your
BLE. Follow
A CAUTION!
The device
incorrectly
PIN. It Use only
Read and follow
if necessary.
NOTICE Forfeiting
are usable. Opening the casing
to the user and will void
Do not open
Use only
II
your app follow the steps
(option) for data transfer,
parameter).
logging immediately tap "Start
later, tap "Disconnect"
press the button between
BLE to start logging.
times green to confirm
(Figure 3)
smartphone with the configured
the steps in the app to display
Lithium Battery!
contains a lithium battery. Handling
could cause a fire.
original or approved batteries.
the valid transportation
the Warranty!
without authorization
any warranty.
the housing.
original or approved accessories.
sp9t Bot
TM
BLE
shown in the
device name, PIN,
logging
in the app. When
2 and 5 seconds on
The SpotBot BLE
that logging
SpotBot
and download
the battery
regulations,
could present risks
BOSCH
Invented for life