Inhaltsverzeichnis
Werbung
Network settings
Using Easy IP Setup Software to configure the
unit's settings
The network settings of the unit's network can be configured with Easy
IP Setup Software. (Windows only)
• When configuring the settings for multiple units, you need to configure
the settings for each camera.
• If the settings cannot be configured with Easy IP Setup Software or if
you are using a Mac, configure the settings individually for the unit and
personal computer on the Network screen of the Web setup menu. (→
page 24)
• For details on the required personal computer environment, refer to
page 8.
• If, after the network settings have been configured, another device in
the same network has the same IP address, the network operations
will not be performed properly.
Set the IP address in such a way that it does not duplicate an existing
IP address.
• Do not configure the network settings from multiple Easy IP Setup
Software programs at the same time for a single camera.
Similarly, do not perform the "Auto IP setting" operation of the
AW-RP50 remote camera controller at the same time. Doing so may
result in no longer knowing what IP address is set.
Installing the software
Install the Easy IP Setup Software on the computer to be connected.
You can use the Easy IP Setup Software supplied with the Panasonic
HD integrated camera (e.g., AW-HE130, AW-HE40) that you will use in
conjunction with this unit or download it from the following website.
http://pro-av.panasonic.net/
z Easy IP Setup Software (EasyIPSetup.exe)
Configure the unit's network settings. For details, refer to the sections
that follow.
<NOTE>
• Easy IP Setup Software cannot be used from a different subnet via
a router.
Configuring the network settings
1.
Start Easy IP Setup Software.
2.
Click the [Search] button.
3.
Click the MAC address/IPv4 address of the camera to be
set, and click the [Network Settings] button.
<NOTE>
• When a DHCP server is being used, the IP address allocated to the
unit can be checked by clicking the [Search] button of the Easy IP
Setup Software.
• If the same IP address is used for any additional cameras, the
numbers of the additional cameras will be displayed in the "IPv4
overlap" column of the cameras concerned.
• When the [Access Camera] button is clicked, the Live screen of the
selected camera is displayed.
4.
Enter the network items, and click the [Save] button.
<NOTE>
• When a DHCP server is being used, [DNS] of Easy IP Setup Software
can be set to [Auto].
• After the [Save] button is clicked, it takes about 2 minutes for the
settings in the unit to be completed. If the AC adaptor or LAN cable is
disconnected before the settings are completed, the settings will be
canceled. In this case, repeat the steps to configure the settings.
• When a firewall (including software) has been introduced, enable
access to all the UDP ports.
13
Werbung
Inhaltsverzeichnis
