Werbung
AU/en
The following tools are required for
side-by-side installation:
– A selection of Torx screwdrivers,
– Drill bits of various sizes,
– Spirit level
– Tape measure
– Spanner wrench (supplied with the
appliance)
Changing the door hinging
^ Change the door hinging for the
left-hand appliance (see "Changing
the door hinging" in the appliance
Operating instructions).
The door hinges are each situated on
the outside.
4
Preparing, aligning and con-
necting appliances.
^ Place the appliances side-by-side in
front of the niche.
Leave sufficient space between the
niche and the back of the
appliances for working.
^ Prepare the appliances (See "Under-
bench installation" in the appliance
Operating instructions).
^ Unscrew adjusting feet clockwise to
4 mm less than the height of the niche.
^ Align the appliance by height and ho-
rizontally using the spanner wrench
(see ""Underbench installation").
A misaligned appliance can become
warped.
Werbung
