Open Source; Installation Rapide - Lenovo EMC2 px4-300r Schnellstart Handbuch

8. Do not walk on the power cord or allow anything to rest on it.
9. There is a danger of explosion if the coin cell lithium battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the equipment manufacturer. Dispose of used batteries according to
local, state, regional, and federal regulations.
Under any of the following conditions, unplug the px device from the wall outlet and contact technical support: The
power cord or plug is damaged, liquid has been spilled into the px device, the px device does not function properly
when the operating instructions are followed, the px device was dropped, or the cabinet is damaged.

Open Source

The software included in this product contains copyrighted software that is licensed under open source agreements.
Components of this software covered under GPL or other open source licenses are fully documented as to license
and redistribution requirements in the ReadMe file available with the source code. The corresponding source code
package is available for download from the LenovoEMC web site at http://support.lenovoemc.com. To locate the
download page for open source code, select your LenovoEMC product and your operating system. Scroll down the
page to the search field and enter "open source". In addition, you can also obtain a copy of the applicable open
source code on CD by sending a money order or check for $10 (USD) to:
LenovoEMC • ATTN: Source Code • 4059 South 1900 West • Roy, UT 84067 USA
Please include the model name for your LenovoEMC product with the request.
Lenovo Limited Warranty Notice
This product is covered by the terms of the Lenovo Limited Warranty, version L505-0010-02 08/2011. Read the
Lenovo Limitied Warranty (LLW) at http://www.lenovo.com/warranty/llw_02. You can view the LLW in a number
of languages from this Web site. If you cannot view the LLW from the Web site, contact your local Lenovo office or
reseller to obtain a printed version of the LLW.
Warranty Information: LenovoEMC px4-300r Network Storage Array
Warranty period: 3 years for product purchased in all regions
Applicable Types of Warranty Service (as described in the Lenovo Limited Warranty):
1. Customer Replaceable Unit ("CRU") Service
7. Product Exchange Service
For network storage products, coverage for product exchange transportation may differ by region. For additional
information on this coverage, please contact a local Lenovo service provider.
For a full explanation of the types of warranty service, refer to the full warranty. See "Lenovo Limited Warranty Notice"
for details on accessing the full warranty.
NOTE: Lenovo and LenovoEMC network storage products are manufactured solely to standard commercial grade
levels of reliability and are not intended for use in any systems that require the products to conform to the higher
grades of reliability, such as critical safety systems, life-support systems, medical devices, nuclear facilities,
military devices, satellites, or aviation equipment. Lenovo shall not be liable for any damages incurred if Lenovo or
LenovoEMC products are used in such capacities, and no warranty shall apply.

Installation rapide

Si vous avez acheté plusieurs périphériques px4-300r, configurez d'abord entièrement un périphérique avant de
passer aux suivants.
IMPORTANT ! Avant d'installer un nouveau disque dur dans la baie de stockage réseau px4-300r, consultez la liste
des disques durs compatibles à l'adresse http://support.lenovoemc.com/px4-300r pour connaître les marques et les
modèles pris en charge.
1. Assurez-vous qu'au moins un disque dur est installé dans le périphérique px4-300r.
2. À l'aide du câble réseau inclus, connectez le périphérique px4-300r à un commutateur ou à un
concentrateur réseau.
3. Connectez le cordon d'alimentation fourni à l'arrière du périphérique px4-300r et à un onduleur (UPS).
4. Mettez le périphérique px4-300r sous tension.
All manuals and user guides at all-guides.com
3