General Guidelines - Velleman VTHD09 Bedienungsanleitung

grinding, side forces applied to these wheels may cause them to shatter.
•
Always use undamaged wheel flanges that are of correct size and shape for your
selected wheel. Proper wheel flanges support the wheel thus reducing the possibility
of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel
flanges.
•
Do not use worn down wheels from larger power tools. Wheel intended for larger
power tool is not suitable for the higher speed of a smaller tool and may burst.
•
Dress appropriately. Do not wear pants with cuffs, shirts with open pockets, or any
clothing that can catch and hold hot metal or sparks.
Safety Warnings Specific for Wire Brushing Operations
•
Be aware that wire bristles are thrown by the brush even during ordinary operation.
Do not overstress the wires by applying excessive load to the brush. The wire
bristles can easily penetrate light clothing and/or skin.
3.

General Guidelines

•
Refer to the Velleman
manual.
•
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
•
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.
•
Keep this manual for future reference.
4. Overview
collet nut
1
collet
2
V. 03 – 10/09/2021
All manuals and user guides at all-guidesbox.com
VTHD09
®
Service and Quality Warranty on the last pages of this
5
housing cap
3
shaft lock button
4
©Velleman Group nv