Automatic Preset Tuning - Yamaha MCR-E810 Bedienungsanleitung

FM/AM Tuning
To switch the frequency step
(Asia and Taiwan models only)
Because the interstation frequency spacing differs in
different areas, you may need to switch the frequency step
mode.
NATURAL SOUND STEREO RECEIVER RX-E810
DISPLAY MEMORY AUTO/MAN'L
TIMER
TIME ADJ TIMER
BASS TREBLE
STANDBY/ON
PHONES
STANDBY/ON
PRESET/BAND
1
While the receiver is in the standby mode,
hold down PRESET/BAND on the front panel,
and then press STANDBY/ON.
The receiver turns on.
2
Press PRESET/BAND repeatedly to select
"FM 50k/AM 9k" or "FM 100k/AM 10k".
3
To confirm the setting, press STANDBY/ON.
38
En
All manuals and user guides at all-guides.com
PURE DIRECT
PRESET/BAND PRESET/TUNING
VOLUME
HOUR MIN
INPUT
BALANCE
L R
MIN MAX

Automatic preset tuning

Follow the procedure below to preset radio stations
automatically.
NATURAL SOUND STEREO RECEIVER RX-E810
DISPLAY MEMORY AUTO/MAN'L
TIMER
TIME ADJ TIMER
BASS TREBLE
STANDBY/ON
PHONES
MEMORY INPUT
1
Rotate INPUT on the front panel of the receiver
to select "TUNER" as an input source.
2
Hold down MEMORY for more than two
seconds.
The AUTO and MEMORY indicator flash in the front
panel display.
• Auto Preset starts at the lowest frequency toward
the highest frequency.
• The receiver automatically applies a preset number
to each detected station.
Notes
• You can preset up to 40 of AM and FM stations by automatic
preset tuning.
• (U.K. and Europe models only)
Only Radio Data System broadcasting stations and AM stations
are stored automatically by automatic preset tuning.
PURE DIRECT
PRESET/BAND PRESET/TUNING
VOLUME
HOUR MIN
INPUT
BALANCE
L R
MIN MAX