Remington Flexibrush Steam Bedienungsanleitung Seite 4

ENGLISH
F INSTRUCTIONS FOR USE
• Before use, ensure the hair is clean, dry and tangle-free.
• For extra protection use a heat protection spray.
, Hairsprays contain flammable material – do not use while using this product.
• This appliance can be used without steam; when steam is required fill the
water reservoir first.
• Hold the unit in a vertical position with cap end down to prevent any spillage
from any residual water left in the cap.
• Unscrew the reservoir and fill with warm or cool water to the fill line. Replace
the cap with the tong still held vertically with cap end down and twist gently
into place.
• The water level in the reservoir can be seen through the water level window.
• Section the hair prior to styling. Style the lower layers first.
• Plug the unit into the mains and wait for it to heat up.
• To activate steam, gently depress the cap. The unit is designed to release with
one push, just the right amount of steam required for a small section of hair.
• Take a section of hair and place the ends around the brush. Rotate the styler
allowing the hair to wrap around the barrel of the brush.
• Press the reservoir cap to release the steam.
• Wait about 10 seconds for curl to form.
• Press the curl release button and carefully draw the unit away allowing hair to
unwind automatically.
• Allow the hair to cool before styling.
• When finished unplug the appliance and allow to cool before cleaning and
storing away.
, Changing the Bristles
• To change the bristles, the unit must be unplugged and cool. Remove the
reservoir and unscrew the bristle lock guard and slide the bristles off the
barrel.
• Taking the other set of bristles, gently glide each row into a groove on the
barrel and push into place. Screw the lock guard securely back into place and
replace the reservoir.
C CLEANING AND MAINTENANCE
• Unplug the appliance and allow to cool.
• Wipe all the surfaces with a damp cloth.
• Don't use harsh or abrasive cleaning agents or solvents.
4