Balluff BOS R254K-UUI-RH10-S4 Konfigurationsanleitung Seite 163

BOS R254K-UUI-RH10-S4
Photoelectric Sensors
6
Secondary Device Functions (continued)
Speed Monitoring State
With Speed Monitoring State, the current status can be
read.
Value Meaning Description
0x00 (0) Idle No speed value yet available
0x01 (1) Too low Speed value is less than the
lower threshold
0x02 (2) Ok Speed value is in the suitable
range
0x04 (4) Too high Speed value is greater than
the upper threshold
0x08 (8) Startup Startup delay currently
Delay running
0xFF (255) Deactivated Feature is deactivated
Tab. 6-14: Signal Speed Monitoring – Speed Monitoring State
Speed Monitoring Value
With Speed Monitoring Value, the current speed value can
be read.
6.3.5 System Commands
Command Device Action
Value
0x81 (129) Application Reset – Resets writable
parameters to the default value.
0x82 (130) Restore Factory Settings – Resets
writable parameters to the default value.
0xAA (170) Signal Speed Monitoring Reset – Resets
the speed value and flags.
Tab. 6-15: Signal Speed Monitoring – System Commands
For an overview of all System Commands, see section 3.5
on page 25.
6.3.6 Events
Event Code Event Type
0x8D08 (36104) Warning
0x8D09 (36105) Warning
Tab. 6-16: Signal Speed Monitoring –Events
6.3.7 Variant Dependence
The functionality is available in all variants.
www.balluff.com
Description
Speed value is below the limit.
Speed value is above the limit.
Device Status
0 – Device is operating properly.
0 – Device is operating properly.
english 55