Hydraulic Connections - EdilKamin Orlando Installation Und Betriebsanleitung

HYDRAULIC CONNECTIONS

(Reserved for DEALER)
The boiler have a boiler with a capacity of 80 Lts. of water.
This signi cant amount of water renders the stove extremely
smooth in operation little affected by variations in demand of
users.
This will provide for highly consistent combustion with excel-
lent yield .
CALGARY/ORLANDO M ST NEVER BE MADE TO OPE-
RATE WITHO T WATER IN THE SYSTEM
.
M ST BE MADE WITH A PRESS RE OF ABO T 1.5 BAR
.
IT CAN BE DAMAGED IF IT IS IGNITED WITH NO WA-
TER IN THE SYSTEM.
The hydraulic connection must be performed by quali ed
personnel who can issue a declaration of conformity according
to the Ministerial decree no. 37 ex L.46/90. Reference must ho-
wever be made to the laws in force in the individual countries.
Water treatment
Foresees the addition of antifreeze de-scaling and corrosion
substances. In the event that the water used for lling and to-
ping up has a hardness greater than 35 F use a water softener.
For suggestions please refer to regulation NI 8065-1989
(Water Treatment In Heating Systems For Civil se).
Incorporated hydraulic kit.
A hydraulic kit is located on the boiler which consists of:
circulator thermostatic mixing valve safety valve expansion
tank
The inclusion of the anti-condensation thermostatic valve pre-
vents corrosion that would otherwise compromise the life of
the boiler body.
.
- 32
-