Cleaning And Storage; Troubleshooting; Disposal - LIVARNO LUX 970-M Bedienungs- Und Sicherheitshinweise

switch to the AUTO position. As soon as
3
the cupboard door or drawer is opened,
the light switches on and remains on for
120 seconds. The infrared sensor
not be covered over. To completely switch
off the cordless magnetic lamp, set the
ON/OFF/AUTO switch
the lamp to the centre, OFF, position.
z Cleaning and storage
Risk of electric shock!
There is a risk of electric shock from parts
that carry electric current. Unplug the USB
mains adapter from the power outlet socket
before attempting to clean the lamp.
Risk of damage!
Cleaning the cordless magnetic lamps and
accessories incorrectly could damage them.
Before cleaning the cordless magnetic
„
lamp, always switch it off and remove the
USB charging cable.
Do not use corrosive cleaning agents,
„
brushes with metal or nylon bristles or not
sharp or metallic cleaning implements such
as knives, hard spatulas or similar items.
They may damage the surfaces.
Never clean the cordless magnetic lamps
„
or accessories under running water.
Wipe down the cordless magnetic lamps
„
and accessories with a slightly moistened
cloth.
Wipe the cordless magnetic lamps and
„
accessories completely dry.
When the cordless magnetic lamp is not in
„
use, store it in a dry place and make sure it
is switched off.
z Troubleshooting
= Fault
= Cause
= Solution
= The lamp does not light up.
= The battery needs charging.
42
GB/IE/NI/CY/MT
must
7
on the side of
3
= Charge the cordless magnetic lamps
via the micro-USB socket using the
USB charging cable supplied. The
charging time is approx. 2-3 hours.
= The charge indicator does not light
up when the lamp is being charged.
= There is no power supply to the
cordless magnetic lamps.
= Please check whether your mains
adaptor and the USB charging cable
are properly connected.
z Disposal
Note the label on the packaging
materials when separating the
b
a waste, these are marked with
abbreviations (a) and numbers (b)
with the following meanings:
1– 7: Plastic
20 – 22: Paper and cardboard
80 – 98: Composite materials
You can find out how to dispose of
the used product by contacting your
local or city council.
In the interest of environmental
protection, do not dispose of the
product via the household waste,
but rather dispose of it properly. For
information on collection points and
their opening times, please contact
your local council.
Faulty or used batteries must be recycled in
accordance with Directive 2006 / 66 / EC
and its amendments. Return batteries and/or
the product via the locally available
collection facilities.
Improper battery disposal
harms the environment!
Batteries must not be disposed of
via the household waste. They may contain
toxic heavy metals and are subject to special
waste treatment. The chemical symbols of the
heavy metals are as follows: Cd = cadmium,
Hg = mercury, Pb = lead.