Intended Use - Scheppach BGT2800 Original Bedienungsanleitung

F. Hexagonal bolt (M8 x 20)
G. Hexagonal bolt (M8 x 40)
H. Wheel axle
I. Transport handles
J. Hexagonal nut (M12)
K. Hexagonal nut, self-locking (M8)
L. Locking nut (M6)
M. Washer, plastic (4x)
N. Washer (2x)
O. Spring washer (2x)
P. Hexagonal open-end spanner 10/12 mm
(2x)
Q. 12V cable

4. Intended use

The machine may only be used in the intend-
ed manner. Any use beyond this is improper.
The user/operator, not the manufacturer, is
responsible for damages or injuries of any
type resulting from this. An element of the
intended use is also the observance of the
safety instructions, as well as the assembly
instructions and operating information in the
operating manual. Persons who operate
and maintain the machine must be familiar
with the manual and must be informed about
potential dangers. In addition, the applica-
ble accident prevention regulations must be
strictly observed. Other general occupation-
al health and safety-related rules and regu-
lations must be observed. The manufacturer
does not take any responsibility for damage
caused by improper use or changes to the
machine.
This power unit can power light bulbs, heat-
ers, drills, water pumps, etc. Do not exceed
the load limit specified for the power unit.
The power unit may not be used to pow-
er devices that have a high power re-
quirement.
The power unit cannot be used for precision
devices such as computers. These preci-
sion devices may be damaged by distor-
tions caused by the broad wave when the
power unit's power is output.
Do not connect the power unit to the elec-
trical installation of a building.
22 | GB
• Use the generator in a technically flawless
condition only, as well as for its intend-
ed purpose, in a safe manner and being
aware of dangers, in compliance with the
operating instructions!
• Disruptions which can affect safety in par-
ticular must be eliminated straight away!
• The manufacturer's stipulations concern-
ing safety, work and maintenance as well
as the measurements specified in Techni-
cal Data, must be complied with.
• The relevant accident prevention stipula-
tions and other widely recognised safety
rules must be observed.
• The generator may only be used, main-
tained or repaired by personnel familiar
with it and its dangers. Unauthorised
changes to the machine negate the man-
ufacturer's liability for damages resulting
from this.
• The generator may only be used for work
for which it has been built and which is
described in the operating manual.
• The generator may only be used with the
manufacturer's original accessories and
original tools.
• Every use beyond that is deemed as not
intended. The manufacturer is not liable
for damage resulting from this; the risk
lies exclusively with the user.
The generator must reach its operating
speed before it can be connected to an
electrical load. Disconnect loads from the
machine before turning off the motor.
In order to prevent damage caused by pow-
er surges, ensure that the fuel tank is not
completely drained when electrical loads
are connected.
Do not insert objects in the ventilation
slots. This also applies when the generator
is turned off. Non-compliance can lead to
damage to the generator or injuries.
Please observe that our equipment was
not designed with the intention of use for
commercial or industrial purposes. We as-
sume no guarantee if the product is used in
commercial or industrial applications, or for
equivalent work.
www.scheppach.com