Herunterladen Inhalt Inhalt Diese Seite drucken

Lanaform Eclipse Bedienungsanleitung Seite 11

Diffusor für ätherische öle
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

05 Then remove the reservoir cover ( 2).
06 Pour fresh, preferably demineralised
water into the reservoir and do not
exceed the maximum level ( 3).
07 Pour 3 or 4 drops of essential
oil into the water ( 4).
08 Replace the reservoir cover
then the glass cover ( 5).
09 Make sure your hands are completely
dry when connecting (and even
disconnecting) the device ( 6).
10 The diffuser is now operational.
Instructions for use
Adjusting the diffusion and timer:
Press the button for adjusting the dif-
fusion, lighting and timer once ( Fig.
1, point 10) to start diffusion. It oper-
ates in continuous diffusion mode by de-
fault; three indicators light up ( 1).
Press the button a second time to pro-
gram diffusion for 1 hour; the top in-
dicator light will switch on ( 2).
Press the button a third time to pro-
gram diffusion for 3 hours; the mid-
dle indicator light will switch on ( 3).
Press the button a fourth time to pro-
gram diffusion for 8 hours; the bot-
tom indicator light will switch on ( 4).
E-IM-Eclipse-Lot001.indd 11
E-IM-Eclipse-Lot001.indd 11
Press the button for stopping dif-
fusion a fifth time; there are no
longer any light indicators ( 5).
To switch to intermittent diffusion mode
(30 seconds ON; 30 seconds OFF),
press the button for 2 seconds; the
three indicator lights will flash twice.
Repeat this operation to return
to continuous diffusion mode
The timer is not interrupted when diffusion
mode is changed. Continuous mode is ac-
tivated once the mains power is unplugged.
3
Adjusting the Light Mode:
Turn the light adjustment button (
Fig. 1, point 10) clockwise to activate
the light and increase the intensity.
Turn the light adjustment button (
Fig. 1, point 10) anti-clockwise to re-
duce the light intensity and turn it off.
By default, the light does not turn off when dif-
fusion stops (either with the timer or with the
automatic shut-off system when the reservoir
is empty). However, it is possible to program
the light according to the diffusion.
To do this, press the button (
Fig. 1, points 10) for 6 seconds un-
til the "3 hr" and "8 hr" indica-
tors flash alternately 3 times.
28-07-22 10:55:44
28-07-22 10:55:44

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis