Product Features; Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch PEX 220 A Originalbetriebsanleitung

16 | English

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Dust box, complete (micro filtersystem)
3 Sanding plate
4 Sanding sheet*
5 Extraction outlet
6 Latching lever for dust box
7 Filter element (micro filtersystem)
8 Screws for sanding plate
9 Extraction adapter*
*The accessories illustrated or described are not
included as standard delivery.

Technical Data

Random Orbital Sander
Article number
Rated power input
No-load speed
Orbital stroke rate
Orbit diameter
Sanding plate diameter
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate
of your machine. The trade names of the individual
machines may vary.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 77 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
1 609 929 M15 | (5.11.07)
PEX 220 A
3 603 C78 0..
W 220
rpm 12000
opm 24000
mm 5.0
mm 125
kg 1.2
/ II
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
ty K < 1.5 m/s .
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly re-
duce the exposure level over the total working
period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
18.09.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
2
= 3.5 m/s , Uncertain-
h
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools