Silent mode
It is to prevent potential claims by neighbors,
reducing noise from outdoor units.
The outdoor unit sound pressure in cooling
and heating mode is decreased by 3dB com-
pared to the rated sound pressure
|
1
Press
to turn the power on.
C
2
Press
.
I
-
is displayed on the display screen.
Silent Mode Function available under the
below temperature set
- Cooling-possible temperature range: Indoor
18°C ~ 30°C, Outdoor 18°C ~ 43°C
- Heating-possible temperature range: Indoor
16°C ~ 30°C, Outdoor 6°C~ 24°C
NOTE
!
• Setting available only under operation-ON
Silent Mode and E/Control are not avail-
able at the same time. If E/Control is
pressed under Silent Mode, Silent Mode is
released and E/Control works.
• Capacity may decrease when outdoor
unit silent mode is selected.
• In Air Circulation, Humidity mode, this
function cannot be used.
Active Energy Control mode
It brings the effect of the power saving.
(Setting available in air cooling mode)
1
step : The power Input in cooling mode is
decreased by 20% compared to rated
power Input
2
step : The power Input in cooling mode is
decreased by 40% compared to rated
power Input
ADVANCED FUNCTIONS
|
1
Press
to turn the power on.
B
2
Press
.
J
-
is displayed on the display screen.
1 Step Entrance
2 Step Entrance
Active Energy Control mode Function avail-
able under the below temperature set
- Cooling-possible temperature range:
Indoor 18°C ~ 30°C, Outdoor 21°C ~ 32°C
NOTE
!
• In Cooling mode, this function can be
used.
• Every time Active E/Control on wireless
remote controller is pressed, 1Step,
2Step, functions release are repeated
and switched Wanted temperature ap-
pears for 5 sec.
• Capacity may decrease when outdoor
unit Active Energy Control mode is se-
lected.
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
G
.
1
Press
Turn on/off the Display screen.
NOTE
!
This function may not be supported,
depending on the model.
15
*
D
*
D