Abicor Binzel ABIROB W300 Betriebsanleitung Seite 33

®
ABIROB W
6.2 Mounting the
1
®
1 ABIROB W torch neck
2 Positioning pin
Fig. 5 Mounting the ABIROB
®
W torch neck
ABIROB
ABIROB
3
®
W300, W500 torch neck
1 Equip the ABIROB
gas nozzle.
2 Introduce positioning pin (2) into marked bore.
®
The ABIROB W torch neck (1) can only be fastened in this position.
3 Connect the ABIROB
fastening nut (4).
NOTICE
• After using the torch for a prolonged period, it may happen that it can no
longer be disconnected by hand. To do this, a suitable wrench is
available. Do not use pliers to disconnect the torch.
4
®
W cable assembly 4
®
W torch neck (1) with a tip adaptor, contact tip and
®
W torch neck (1) to cable assembly (3) with
6 Putting into operation
2
3
Fastening nut of welding torch
EN - 11