CE labelling
This product satisfies the
requirements of the applicable
European and national directives.
Separate the product and packaging
elements and dispose of them in
accordance with local regulations.
4. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
Removable, rotating professional
1
nozzle
Folding device handle
2
Voltage switchover
3
Anti-kink protection with hanging
4
eyelet
Mains cable
5
5. USAGE
Important
• Set the correct operating voltage (100-120 V or 220-240 V) before using the device for the
first time.
Warning
• Position yourself on a dry, non-conductive surface. Risk of electric shock!
• Make sure that your hands are dry! There is a risk of electric shock!
• The professional nozzle
switch setting and period of use – risk of burns and fire!
• Do not touch the professional nozzle
• Place the hair dryer on non-flammable surfaces only. Risk of fire!
• Ensure that no hair can be directly sucked into the device. Risk of fire!
Cold air button
6
Sliding switch with three settings:
7
0 Off
1 Low air flow, warm air
2 High air flow, hot air
Removable protective grille with lint filter
8
Air outlet
9
and the hair dryer may become very hot depending on the
1
during use as it will heat up. Risk of fire and burns!
1
16
Disposal in accordance with the
Waste Electrical and Electronic
Equipment EC Directive – WEEE
Protection class II device
The device is double-protected
and thus corresponds to protection
class 2