Mounting The Tool - Stihl FG 2 Gebrauchsanleitung

English

Mounting the Tool

A
B
: Secure the base plate to the bench
using either the wood screws (A)
provided or the screw clamps (B)
available as special accessories.
16
5
1
4
2
6
: Place the chain rest (1) on the base
plate (2) – the clamping lever (3)
must face away from the bench.
: Make sure the studs (4) engage the
holes.
: Fit the hex head screw (5) through
the center hole from above.
: Fit and tighten down the wingnut (6)
firmly.
: Position the filing frame (7) on the
3
swivel arm (8) so that the stop pin
engages the slot.
4
: Tighten down the nut (9) firmly.
7
8
9
FG 2