Configuration Via Operating Keys - Endress+Hauser RIA16 Bedienungsanleitung

Operating the field display unit
5.2

Configuration via operating keys

#
Warning!
The device must be configured outside the hazardous area.
Fig. 8: Operating keys of field display unit ("-", "+", "E")
To configure the device, open the housing cover. The keys (+, -, E) can now be accessed.
During configuration, the display must be connected to the electronics unit.
5.2.1 Navigation
The operating fields are split into 2 levels.
Menu: Various menu items can be selected on the menu level. The individual menu items are
an aggregation of the associated operating functions.
Operating function: An operating function can be regarded as an aggregation of the operating
parameters. The operating functions are used to operate and configure the device.
Operating keys:
'E' Enter key: Press and hold down the E key for longer than 3 seconds to enter the
programming menu.
– Selecting operating functions.
– Accepting values.
– If the E key is pressed for longer than 3 seconds, the system returns directly to the Home
position. Beforehand, you are asked whether the data entered up to now should be saved.
– Saving data entered.
Selection keys '+/-':
– Selecting the menus.
– Configuring parameters and numerical values.
– After selecting the operating function, the value is entered or the setting changed by pressing
the + or - keys.
!
Note!
If the keys are pressed for an extended period, the digits are changed with increasing speed.
34
RIA16
a0011261
Endress+Hauser