Operation; Energy Saving Tips; Using The Cooling Device - Waeco CoolMatic CB-36 Bedienungsanleitung

_CB_RHD_Kühlboxen.book Seite 26 Montag, 20. Dezember 2004 11:24 11

Operation

7 Operation
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the the "Cleaning and maintenance"
chapter on page 28).
7.1

Energy saving tips

Choose a well ventilated installation location which is protected against
direct sunlight.
Allow food to cool down first before placing it in the device.
Do not open the cooling device more often than necessary.
Do not leave the door or lid open for longer than necessary.
Defrost the cooling device as soon as a layer of ice forms.
Avoid unnecessarily low temperatures.
Clean the condenser of dust impurities at regular intervals.
7.2

Using the cooling device

The cooling device conserves fresh foodstuffs. You can conserve frozen
foodstuffs and freeze fresh foodstuffs in the COOLMATIC CB-36 and CB-40
devices.
Caution!
Ensure that food or liquids in glass containers are not excessively
refrigerated.
Liquids expand when they freeze and can thus destroy the glass
containers.
➤ Switch the cooling device on by turning the knob to the right.
After switching on, the cooling device requires approx. 60 s until
the compressor starts up.
Caution!
Ensure that the objects placed in the cooling device are suitable
for cooling to the selected temperature.
Lock
RHD-50
To open the cooling device, turn the lock knob anticlockwise.
To lock the cooling device, turn the lock knob clockwise.
26
CB-36, CB-40, RHD-50