Switching Off; Storing The Machine - Stihl HSA 66 Gebrauchsanleitung

Switching Off

1
Release the switch lever (1) and the
N
trigger switch (2).
3
4
Move the retaining latch (3) to ƒ –
N
the trigger switch (4) cannot be
operated – the power tool is locked
to prevent start-up.
Always remove the battery from the
power tool during work breaks and after
finishing work.
HSA 66, HSA 86
Removing the battery
2
1
Press in both locking tabs (1) at the
N
same time to unlock the battery.
Take the battery (2) out of the
N
housing.
When the machine is not in use, store it
in such a way that it does not endanger
others.
Secure it against unauthorized use.

Storing the Machine

Move the retaining latch to ƒ.
N
Remove the battery.
N
1
Clean the cutting blades, check
N
condition and spray them with
STIHL resin solvent.
Fit the blade scabbard.
N
Thoroughly clean the machine,
N
especially the cooling air inlets.
Store the machine in a dry, locked
N
location – the blade scabbard can
be mounted to the wall for this
purpose. Keep out of the reach of
children and other unauthorized
persons.
Cover for battery compartment (special
accessory)
The cover prevents dirt falling into the
empty battery compartment.
After finishing work, slide the
N
cover (1) home until it engages
audibly in position.
English
1
43