mysoda WOODY Bedienungsanleitung Seite 7

INSTALLING THE CO2 CYLINDER
1
1. Remove the water bottle by pulling the
bottle and carbonation nozzle towards
yourself, and then unscrew it (one
quarter clockwise).
4. Remove the seal and cap from the
CO2 cylinder.
CHANGING THE CO2 CYLINDER
After the CO2 cylinder is empty, replace the CO2 cylinder in the same way as the first time you installed the
cylinder.
Usage tip: A used CO2 cylinder can be refilled by your Mysoda dealer. Return the empty
cylinder so that you only pay for the gas refill.
Usage tip: Buy another CO2 cylinder in your home so that you can replace it as soon as
you run out of gas. Extra cylinders are available from Mysoda dealers.
1
2
2. Uninstall the top part of
the device body by turning it
anti-clockwise.
5. Install the CO2 cylinder by
screwing it clockwise. Attach the
cylinder firmly enough, but do not
tighten too much.
2
3. Unscrew the black thread
protective cap on the top part of the
device body.
1
6. Carefully insert the CO2 cylinder
and top part together to the bottom
part. Turn the top part clockwise until
it clicks into place.
EN
2
7