Inhaltsverzeichnis
Werbung
MULTI-FUNCTION DISPLAY
Changing odometer and tripmeter A/B
(TRIP A/B)
1. Push the "SLCT2" button to change the
tripmeter display. The display will change
in the following order:
Odometer → TRIP A → TRIP B → TRIP A
→ Odometer.
NOTE:
To reset the digits, select the tripmeter
involved and push the "RST" button for 2 sec-
onds or more.
CHANGEOVER TO BASIC MODE/RACE
MODE
NOTE:
• Measurement using the timer function can be
made in RACE MODE.
• Indicator
shows RACE MODE has been selected.
• RACE MODE cannot display the functions as
in BASIC MODE.
• Changeover to RACE MODE forces the dig-
its for tripmeter A (TRIP A) in BASIC MODE
to be reset.
Changeover from BASIC MODE to RACE
MODE
1. Push the "SLCT1" button and "SLCT2" but-
ton for 2 seconds or more at the same time
to change over to RACE MODE.
NOTE:
Changeover to RACE MODE will put manual
start measurement on standby causing
and
to flash. (For manual start, refer to
"Putting measurement on standby" in "RACE
MODE".)
1 - 16
GEN
INFO
will light up as an identifier that
Werbung
Inhaltsverzeichnis
