Protecting The Environment - Black & Decker GTC2451 Handbuch

After use, carefully clean the blades.
x
After cleaning, apply a film of light machine oil
to prevent the blades from rusting.
Regularly clean the ventilation slots in your tool
x
and charger using a soft brush or dry cloth.
Regularly clean the motor housing using a
x
damp cloth. Do not use any abrasive or
solvent-based cleaner.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not
be disposed of with normal household
waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once
they have reached the end of their working life.
To take advantage of this service please return
your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker office at the address indicated in
this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com
Batteries
Black & Decker batteries can be recharged
many times. At the end of their useful life,
discard batteries with due care for our
environment:
Run the battery down completely, then remove
x
it from the tool.
NiCd and NiMH batteries are recyclable.
x
Take them to any authorised repair agent or a
local recycling station.
Technical data
Voltage
Blade strokes (no load)
Blade length
Blade gap
Blade brake time
Weight (without battery)
Battery
Voltage
Capacity
Weight
Charger
Input voltage
(Australia & New Zealand) V
Approx. charging time
Weight
GUARANTEE
Black & Decker is confident of the quality of its
products and offers an outstanding guarantee.
This guarantee statement is in addition to and in
no way prejudices your statutory rights.
The guarantee is valid within the territories of the
Member States of the European Union and the
European Free Trade Area.
E N G L I S H
GTC2451 GTC610
GTC610NM
V 24 18
DC
min -1 1,400 1,300
cm 51 51
mm 12 12
s < 0.5 < 0.5
kg 2.2 2.2
V 24 18
DC
Ah 1.2 1.5
kg 1 0.8
V 230 230
AC
240 240
AC
h 3 1
kg 0.4 1.2
11