Preparation Before Use; Safety Guidelines; Filtration Process; Requirements - Vito X-Serie Bedienungsanleitung

7. Preparation before use

7.1 Safety guidelines

• Don't plug the VITO machine when you get it immediately for the first time. Wait until VITO can acclimate.
• Clean VITO before using it the first time.
• Check the lance (7) and power cord (5) if they are okay.
• Make sure that the local voltage is conform to the voltage on the type label of VITO!
• BEFORE YOU START WORKING WITH
• DO NOT RETURN THE OIL WITHOUT PLACING THE LANCE INTO THE FRYER!
• DO NOT get the power cord (5) in contact with hot oil / shortening or other hot objects!
• The maximum operating temperature is 200°C / 392°F! (Recommended frying temperature 175°C/347°F)
• DO NOT run the pump without oil!
• Pay attention to heating elements, grids or thermal sensors of the fryer!
• Check if the oil level sensor (25) is undamaged. If oil level sensor is damaged, VITO can run over!
• DO NOT destroy the oil level sensor (25) by placing the filter basket (23) incorrectly or with the lance (7) or
any other object! The glass prism will be destroyed by mishandling!
• DO NOT use with damaged power cord (5)!
• DO NOT use with damaged hose (7)!
• Device is hot during / after filtration and can cause burns!
• Maximum tank volume VITO XS 40 l / 73 lbs - VITO XM 75 l / 137 lbs - VITO XL 120 l / 220 lbs.
• Operating without filter basket (23) can / might destroy the unit!
• Only operate on a horizontal surface!
• Only hold at the handles (2, 3)!
• DO NOT unscrew power cord (5)!
• Take the lance (7) out of the fryer after the filtration process!
DO NOT use VITO without closed top-cover (1).
•
• You can work with VITO X-series without ear protection for max. 30 min of filtration per day.
DO NOT move VITO with open top-cover (1).
•
• DO NOT move VITO during filtration process!

8. Filtration process

8.1 Requirements

1. Insert the filter basket (23) into the tank (18). Filter basket inflow
bottom (20) must be plugged into connection piece (19)
inside the tank (18).
2. Place the particle filter (26) in the filter basket (23)
(See chapter 11 Particle filter change).
3. Check if the sealing (27) is completely (all around the machine)
covered by the filter basket (23) shape.
4. Close the top cover (1) using locking handle (2).
5. Make sure that the quick coupling (16) fits well.
• Operation without a proper set up of the filter basket (23)
and correctly closed top-cover (1) is not possible.
Top-cover closed
VITO YOU MUST TURN OFF THE FRYER.
Top-cover open
1 20 18
26
2
23
27
Page 5