Technical Data; Noise/Vibration Information - Bosch GOF 1250 CE Professional Originalbetriebsanleitung

OBJ_BUCH-2018-004.book Page 16 Monday, February 16, 2015 1:39 PM
16 | English
16 Button for zero point of depth stop(GOF 1250 LCE)
17 Button for switching the unit of measure (mm/inch)
(GOF 1250 LCE)
18 On/Off switch for digital depth display(GOF 1250 LCE)
19 Adjustment range for depth-of-cut fine adjustment
20 Left handle (insulated gripping surface)
21 Display(GOF 1250 LCE)
22 Battery compartment cover(GOF 1250 LCE)
23 Release lever
24 Scale for depth-of-cut fine adjustment
25 Adjustment knob for depth-of-cut fine adjustment
26 Scale for depth-of-cut(GOF 1250 CE)
27 Slide with index mark(GOF 1250 CE)
28 Thumbwheel for speed preselection
29 On/Off switch
30 Extraction hose port
31 Open-end spanner with width across flats of 19 mm

Technical Data

Plunge router
Article number
Rated power input
No-load speed
Speed preselection
Constant electronic control
Soft starting
Connection for dust extraction
Digital depth display
Light ring
Tool holder
Plunge depth
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-17.
Typically the A-weighted noise levels of the product are:
Sound pressure level 76 dB(A); Sound power level 87 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-17:
2 2
a =7.0 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
1 609 92A 16H | (16.2.15)
32 Extraction hose (Ø 35 mm)*
33 Parallel guide
34 Rod for parallel guide (2x)
35 Wing bolt for parallel guide fine adjustment (2x)
36 Wing bolt for parallel guide coarse adjustment (2x)
37 Adjustment knob for parallel guide fine adjustment
38 Adjustable edge guide for parallel guide
39 Extraction adapter for parallel guide*
40 SDS guide-bushing adapter
41 Fastening screw for guide bushing adapter (2x)
42 Release lever for guide bushing adapter
43 Guide bushing
44 Pan head screw for guide plate fixing (5x)
45 Centring pin
46 Seal
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GOF 1250 CE
3 601 F26 0..
W 1250
-1
min 10000 – 24000
mm 6 – 8
inch
mm 60
kg 3.6
/II
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GOF 1250 LCE
3 601 F26 1..
1250
10000 – 24000
 
 
 
 

–

–
6 – 8
¼ ¼
60
3.7
/II
Bosch Power Tools