Technical Data; Noise/Vibration Information - Bosch gof 1300 ce Professional Originalbetriebsanleitung

OBJ_BUCH-203-003.book Page 22 Tuesday, September 2, 2008 8:46 AM
22 | English
35 Extraction adapter for parallel guide*
36 Router compass/guide-rail adapter*
37 Router compass handle*
38 Wing bolt for coarse adjustment of
router compass (2x)*
39 Wing bolt for fine adjustment of
router compass (1x)*
40 Fine-adjustment knob for router compass*
41 Centring screw*
42 Base spacer
(included in the "router compass" set)*

Technical Data

Plunge router
Article number
Rated power input
No-load speed
Speed preselection
Constant electronic control
Connection for dust extraction
Tool holder
Plunge depth
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.

Noise/Vibration Information

Measured values determined according to
EN 60745 (chip board).
Typically the A-weighted noise levels of the
product are: Sound pressure level 89 dB(A);
Sound power level 100 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
tainty K =2.5 m/s .
1 609 929 N93 | (2.9.08)
43 Guide rail*
44 Guide bushing adapter
45 Fastening screw for guide bushing adapter
46 Release lever for guide bushing adapter
47 Guide bushing
48 Pan head screw for guide plate
49 Countersunk head screw for guide plate
50 Centring pin
*The accessories illustrated or described are not in-
cluded as standard delivery.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
2
=5.5 m/s , Uncer-
h
working period.
(2x)
GOF 900 CE
Professional
0 601 614 6..
W 900
-1
min 12000 – 24000
mm 6 – 8
inch ¼
mm 50
kg 3.5
/II
GOF 1300 CE
Professional
0 601 613 6..
1300
12000 – 24000
6 – 12.7
¼ – ½
58
4.8
/II
Bosch Power Tools