Herunterladen Diese Seite drucken

XUNZEL iSCC-LXM Serie Bedienungsanleitung Seite 4

Werbung

EN IMPORTANT INFORMATION. READ. KEEP
01
• Electric shock hazard, do not touch direct current (DC) terminals under any
circumstances.
• Do not handle damaged cables or use damaged equipment.
• This product has no user-serviceable components. Do not disassemble or attempt
to repair the equipment.
• Turning off and/or disconnecting the equipment in this product does not reduce
the electrical hazard. Failure to follow these instructions may result in serious
injury or death.
• Electric shock hazard at solar panels. Cover the solar panels when handling them
and avoid contact with cables under any circumstances.
• Never short-circuit the terminals of the batteries and solar panels.
• Connecting the equipment to the batteries can generate a spark. Install in a place
without risk of fire.
• Never charge frozen batteries.
• Be careful when working with metal tools on or near batteries. It may cause a
short-circuit.
• Carry out connections with extreme caution, respect polarities and check that
connections are firm and tight.
• Keep equipment out of reach of children and animals.
• Before installing the product, check that all local requirements and regulations
are met.
• The product should be installed by an electrician or qualified personnel. Ensure
that insulated tools and safety equipment such as protective goggles and special
gloves are used.
• Do not perform measurements in wet or damp environments. Measurements out
of range or safety limit could irreversibly damage the measuring instruments.
• The product must be installed or stored indoors, in an environment free of moisture,
dust, heat, freezing temperatures or conductive or flammable contaminants. Do
not allow water to enter the equipment. Ensure that there is sufficient space for
ventilation.
• Never use abrasive or corrosive products to clean this product.
• The use of cables with incorrect size and lengths can cause irreversible damage
to the equipment and even fire.
• Risk of falling when working at height. Use adequate fall protection and comply
with safety protocols.
4
DANGER
WARNING
ATTENTION
CAUTION

Werbung

loading

Verwandte Produkte für XUNZEL iSCC-LXM Serie