en
Adjusting the grind setting
Adjusting the grind setting
This fully automatic coffee machine has an
adjustable grinding unit. This enables the
grinding level of the coffee to be individually
changed�
■ Open the appliance door.
■ Slide the regulator to select the grinding
degree setting between finely ground
coffee V and coarsely ground coffee W�
■ Close the appliance door again.
F
For dark roast coffee beans, choose
a finer grind, for lighter beans a
coarser grind�
Tip: Only make small changes to the
grinding degree setting�
The new setting will not become
apparent until after the second cup
of coffee�
If the display shows the message
"Select a coarser degree of grinding",
this means that the beans are being
ground too finely. Adjust the grinding
level to a coarser setting.
Child-proof lock
The appliance can be locked to protect
children against scalding and burns.
■ Press and hold A for at least
4 seconds� "Child-proof lock activated"
briefly appears on the display.
No further operation is now possible; only
A can be pressed�
■ To deactivate the child lock, press and
hold A for at least 4 seconds.
"Child-proof lock deactivated" briefly
appears on the display.
50
Menu
The menu is used for changing individual
settings, accessing information and launch-
ing processes�
■ Touch A to open the menu�
The different setting options will appear in
the touch display and the current setting in
the round information display.
Navigating through the menu:
By touching e.g. language the corre-
sponding setting option is activated and
highlighted red.
Turn the control ring to enter the settings,
e�g� "English". By touching [ Next ] , other
setting options will appear.
Language
Water
English
hardness
Switch off
after
For example:
Set the appliance at 15 minutes to switch
off automatically:
■ Touch A� The menu opens�
■ Touch [ Switch off after ] , the field is
highlighted red.
■ Turn the control ring and select "00h15m"�
■ Touch A� [ S ave ] and [ D o not save ]
appears�
■ Touch [ Save ] � The setting is saved�
The drink selection appears on the display.
F
Press A to exit the menu at any
time. If no entry is made within
approx. 30 seconds, the menu
closes automatically and the settings
are not saved�
The following settings can be made:
Language
Set the desired language to show the
display texts.
Water hardness
Set this to the local water hardness.
Level "1 (soft)" to "4 (very hard)" can be
selected. The preset water hardness is
"4 (very hard)"�
Illumination
Brightness
illumination
Next