RTX1000/2000, SPX1200
No. in
fig. 2, page 4
6
7
6.3
Remote control
The remote control contains the following operating elements:
No. in
fig. 3, page 4
1
2
3
4
5
6
7
8
9
EN
Symbol Description
Switches the parking cooler
•
on
•
off (press button longer than 3 s)
•
to standby mode (press button briefly)
LED Power (blue):
Only lights up when the system is switched on or in
standby.
Symbol Description
Press button briefly: Switches the parking cooler to
standby mode or on again, if it is in standby mode
Press button longer than 3 s: Switches the parking
cooler off
The parking cooler only can be switched on at the control
panel.
Increases the timer running time by 10 min.
Reduces the set point by 1 °C/2 °F.
–
Increases the set point by 1 °C/2 °F.
+
Switches the parking cooler to MANUAL mode and
–
reduces the speed of the fan.
Switches the parking cooler to MANUAL mode and
+
increases the speed of the fan.
Switches the parking cooler to AUTO mode.
Switches the parking cooler to ECO mode.
Switches the parking cooler to BOOST mode.
Operation
11