Adjusting The Height Of The Upper Basket; Starting The Appliance - Inventum IVW6006A Benutzerhandbuch

Warning:
Place sharp items of cutlery, such as knives and forks, face down in the cutlery basket to prevent injury.
Caution:
Make sure that there are no items of cutlery sticking out of the bottom of the basket.
1. Place the cutlery piece by piece in a compartment of the cutlery basket to make sure that the
spray arms can reach all items.
Loading the upper basket
The upper basket is designed for loading cups and saucers, small bowls and glasses. You can both adjust the height
of the upper basket and the height of the racks of the upper basket to create more space.
1. If necessary, adjust the height of the racks of the upper basket. Refer to section
of the upper basket'
.
2. If necessary, adjust the height of the upper basket. Refer to section
3. Place the dishes in the upper basket.
4. Make sure that you place wine glasses and long-stem glasses against the edge of the basket, rack or glass
supporter wire.
Caution:
Do not place wine glasses and long-stem glasses against other items to prevent damage to the
glasses.
5. Place long, small cooking utensils, such as wooden spoons, in the middle of the upper basket.
Loading the lower basket
The lower basket is designed for loading pots with long handles, pans, lids, plates and salad bowls. The lower basket
also has space for the cutlery basket.
1. Place the dishes in the lower basket.
ADJUSTING THE HEIGHT OF THE RACKS OF THE UPPER BASKET
The racks can be moved up to create more space in the upper basket, for example to place different-sized glasses
under the racks or to place cutlery items on the racks.
1. Move the racks (A) up or down.

ADJUSTING THE HEIGHT OF THE UPPER BASKET

The complete upper basket can be moved to create more space in the upper basket or in the lower basket. When the
upper basket is in the upper position, you can place large items, such as pots and large plates, in the lower basket.
When the upper basket is in the lower position, you can place large plates in the upper basket.
1. Pull out the upper basket.
2. Remove the upper basket (A).
3. Install the upper basket (A):
a. Install the basket in the upper runners to put the basket in the lower position (B).
b. Install the basket in the lower runners to put the basket in the upper position (C).
4. Push in the upper basket.

STARTING THE APPLIANCE

1. Push the on/off button to start the appliance. The program indicator goes on.
40 • English
'Adjusting the height of the racks
'Adjusting the height of the upper basket'
(Figure 12)(Figure 13)
(Figure 10)
.
(Figure 11)
(Figure 14)
(Figure 15)
(Figure 16)