2.6
Product data for energy consumption
The following product data satisfy the requirements of the EU
Regulations No. 811/2013 and No. 812/2013 supplementing EU
Regulation 2017/1369.
Manufacturers who implement these guidelines and state the ErP values
are permitted to use the "CE" mark.
Product
Product
number
type
volume (V)
7735501559
WS 290-5
EPK1 C
7735501558
WS 300-5
PK1 C
7735501560
WS 400-5
EPK1 C
8732935224
WS 400-5
EKP1 B
7735501561
W 300-5
PK1 B
7735501562
W 400-5
PK1 C
8732935226
W 400-5
KP1 B
Table 6 Product data for energy consumption
3
Regulations
Observe the following guidelines and standards:
• Local regulations
• EnEG (Building Regulations) (in Germany)
• EnEV (in Germany)
Installation of, and equipment for, heating and water heating systems:
• DIN and EN standards
– DIN 4753-1 – Water heaters ...; requirements, identification,
equipment and testing
– DIN 4753-3 – Water heaters ...; corrosion protection on the
water side with glass lining; requirements and testing (product
standard)
– DIN 4753-7 – Water heaters, containers with a volume up to
1000 l, manufacturing, thermal insulation and corrosion
protection requirements
– DIN EN 12897 – Water supply - regulation for ... DHW cylinders
(product standard)
– DIN 1988-100 – Technical rules for potable water installations
– DIN EN 1717 – Protection of potable water against pollution ...
– DIN EN 806-5 – Technical rules for potable water installations
– DIN 4708 – Central water heating systems
– EN 12975 – Thermal solar systems and their components
(collectors)
• DVGW
– Code of Practise W 551 – domestic hot water heating systems
and pipework; technical measures to inhibit the growth of
legionella bacteria in new systems; ...
– Code of Practise W 553 – Sizing DHW circulation systems ...
Product data for energy consumption
• EU Regulation and Directives
– EU Regulation 2017/1369
– EU Regulation 811/2013 and 812/2013
Stora – 6720821526 (2021/06)
Cylinder
Heat
Energy
retention
efficiency
loss (S)
class for
DHW
treatment
290,0 l
93,0 W
C
290,0 l
80,0 W
C
371,1 l
100,0 W
C
367,0 l
73,8 W
B
294,0 l
74,9 W
C
375,0 l
93,1 W
C
375,0 l
69,9 W
B
4
Transport
WARNING
Risk of injury from carrying heavy loads and inadequately securing
loads for transport!
▶ Use suitable means of transport.
▶ Secure the cylinder to prevent it falling.
The outer casing can be removed for transportation ( Fig. 11, page 70).
If there is limited space for access, a slat can be left screwed on and used
to carry the cylinder to the required location, where it is then removed
( Fig. 9, page 69).
▶ Move packed cylinder with a sack truck and lashing strap
( Fig. 9, page 69).
-or-
▶ Move unpacked cylinder with a transport net (accessory);
during handling, protect connections against possible damage
( Fig. 9, page 69).
The heat exchanger is not mounted completely rigidly. Rattling noises
may therefore be heard during transportation. This is harmless from a
technical standpoint and is not a sign that the cylinder is faulty.
Regulations
51