Technical Data; Before Starting The Equipment - Scheppach Manupro MPRCPV80L Bedienungsanleitung

• Never set up or operate the equipment in the vicin-
ity of a fire place, open lights or sparking machines.
• Do not store or eat food and drink in the work area.
Paint vapours are harmful to your health.
• The work area must exceed 30 m³ and suffi cient
ventilation must be ensured during spraying and
drying.
• Do not spray against the wind. Always adhere to
the regulations of the local police authority when
spraying combustible or hazardous materials.
• Do not process media such as white spirit, butyl
alcohol and methylene chloride with the PVC pres-
sure hose. These media will destroy the pressure
hose.
• The work area must be separated from the com-
pressor so that it cannot come into direct contact
with the working medium.
Operating pressure vessels
• You must keep your pressure vessel in good work-
ing order, operate the vessel correctly, monitor the
vessel, carry out necessary maintenance and re-
pair work immediately and meet the relevant safety
precautions.
• The supervisory authority may enforce essential
control measures in individual cases.
• A pressure vessel is not allowed to be used if it has
faults or deficiencies that can endanger workers
or third parties.
• Check the pressure vessel for signs of rust and
damage each time before using. Do not use the
compressor with a damaged or rusty pressure
vessel. If you discover any damage, then please
contact the customer service workshop.
Do not lose these safety instructions.

6. Technical data

Mains connection
Motor rating
Operating mode
Compressor speed
Pressure vessel capacity
Operating pressure bar
Theoretical intake capacity
Theoretical delivery rate
Protection type
Weight of the unit
Max. altitude
(above mean sea level)
Pressure ratio
22 | GB
230 V~ / 50 Hz
1800 W
S1
2850 min
-1
80 l
approx. 10
approx. 257 l/min
approx. 180 l/min
IP20
51.6 kg
1000 m
2,23
Noise and vibration
Total vibration values determined in accordance with
EN ISO 3744.
Wear hearing protection.
The effects of noise can cause a loss of hearing.
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Sound power level L
wA
Sound pressure level L
pA
Uncertainty K
wA/pA
m Warning
The vibration emission value can vary from the spec-
ified value during actual use of the electric tool, de-
pending on the way it is used.
Try to keep exposure to vibrations as low as possi-
ble. Measures to reduce exposure to vibration are,
for example, wearing gloves when using the ma-
chine, or by reducing the work time.
All parts of the operating cycle must be considered
for this (for example: times during which the electric
tool is switched off and times when it is turned off but
runs without load).
Reduce noise generation and vibration to a mini-
mum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adapt your working method to the machine.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.

7. Before starting the equipment

• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
97 dB(A)
73,7 dB(A)
2,37 dB(A)