Troubleshooting - Panasonic ES‑CV51 Betriebsanleitung

Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store
where you purchased the unit or a service centre authorized
by Panasonic for repair.
Problem
The power switch does
not turn ON.
The shaving sensor
does not respond.
18
ES-CV51_EU.indb 18
Action
Unlock the switch lock.
(See page 14.)
Depending on the beard
thickness or the amount of beard
trimmings in the shaver head,
the shaving sensor may not react
and the driving sound may not
change. This is not abnormal.
The shaving sensor may not
respond depending on the type
and quantity of the shaving gel.
This is not abnormal.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. (See page 16.)
The shaving sensor may not
respond when there is not
enough oil on the blades.
Problem
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 15.)
The shaving sensor
responds even though
Replace the system outer foil
the shaver is not in
and/or inner blades.
contact with the skin.
Expected life of system outer
foil and inner blades:
System outer foil:
Inner blades:
Apply oil.
This can be improved by cleaning
Operating time is short every time after shaving.
even after charging.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
Use the appliance in an
ambient temperature
approximately 5 °C or higher.
The battery has reached the
Shaver does not operate end of its life.
even after charging.
The shaver will not operate with
the AC adaptor connected.
Please use the shaver after it has
been sufficiently charged and the
AC adaptor disconnected.
Action
Approximately 1 year
Approximately 2 years
2017/08/04 19:57:14