Connection Cable - AEG HK624010XB Benutzerinformation

3.3 Connection cable

• The hob is supplied with a connection
cable.
• To replace the damaged mains cable, use
the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Contact an Authorised Service
Centre. The connection cable may only be
replaced by a qualified electrician.
3.4 Assembly
If you install the hob under a hood, please
see the installation instructions of the hood
for the minimum distance between the
appliances.
min.
500mm
min.
12
min.
50mm
min.
28
Find the video tutorial "How to install your
AEG Radiant Hob - Worktop installation" by
typing out the full name indicated in the
graphic below.
How to install your AEG
Radiant Hob - Worktop installation
3.5 Protection box
If you use a protection box (an additional
accessory), the protective floor directly below
the hob is not necessary. The protection box
accessory may not be available in some
countries. Contact Customer Support
Service.
min.
12 mm
min.
60 mm
www.youtube.com/electrolux
www.youtube.com/aeg
ENGLISH 35