Clock Functions - AEG BEK435060B Benutzerinformation

7. CLOCK FUNCTIONS

7.1 Clock functions
Clock function
Time of Day
Duration
Minute Minder
7.2 How to set: Clock functions
How to set: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is
not set.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to change: Time of Day
Step 1
- press repeatedly to change the time of day.
Step 2
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to set: Duration
Step 1 Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
, - press to set the duration.
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4 Press any button to stop the signal.
Step 5 Turn the knobs to the off position.
How to set: Minute Minder
Step 1
- press repeatedly.
Application
To set, change or check the time of day.
To set how long the oven works.
To set a countdown. This function has no effect on the operation of the
oven. You can set this function at any time, also when the oven is off.
- starts to flash.
.
- starts to flash.
- starts to flash.
ENGLISH 129