Attaching The Gear Lever; Topping Up The Gearbox Oil; Topping Up The Engine Oil - Stihl MH 600 Gebrauchsanleitung

English
6.7

Attaching the Gear Lever

► Slide gear lever (3) onto the mount so the bores align.
► Insert bolt (2).
► Screw on nut (1) and tighten.
6.8

Topping Up the Gearbox Oil

The gearbox oil lubricates and cools the tiller gearbox.
NOTICE
The tiller does not contain any gearbox oil on delivery.
Starting the engine with no or too little gearbox oil may
damage the tiller.
► Check the gearbox oil level before starting and if
necessary top up.
► Stop the engine.
► Place the tiller on a level surface.
► Clean the area around the gearbox oil cap with a damp
cloth.
54
► Turn the gearbox oil cap anti-clockwise until it can be
removed.
► Remove the gearbox oil cap.
► Add 0.95 l of SAE10W30 gearbox oil without spilling any.
► Place the gearbox oil cap on the filler neck.
► Turn the gearbox oil cap clockwise and hand tighten.
The filler neck is sealed.
6.9

Topping Up the Engine Oil

The engine oil lubricates and cools the engine.
The engine oil specification and capacity can be found in the
engine instruction manual.
NOTICE
The tiller does not contain any engine oil on delivery.
Starting the engine with no or too little engine oil may
damage the tiller.
► Always check the engine oil level before starting and if
necessary top up.
► Add the engine oil as described in the engine instruction
manual.
6 Assembling the Cultivator
0478-404-9807-A