De Dietrich DOR7586A Gebrauchsanleitung Seite 62

5
•
CARE
cycle to quickly and automatically
clean the inside of the oven: it cleans
a mildly dirty oven interior in less than
an hour.
The electronic oven temperature mo-
nitor determines whether the residual
heat remaining in the oven interior is
sufficient to provide a good cleaning
result. If this is not the case, a 90-mi-
nute pyrolysis cycle will automati-
cally begin.
Auto Pyro: between 1:30 and
2:15 for cleaning to save
energy.
Turbo Pyro: in 2:00
for more in-depth cleaning of the
inside of the oven.
IMMEDIATE SELF CLEANING
- Select the «CLEANING» function when
you are in the general menu then confirm.
- Select the most suitable self cleaning
cycle, for example Turbo Pyro, and
confirm.
The pyrolysis cycle begins. The time
starts to count down immediately it is
set.
During pyrolysis, the symbol
displays in the programmer to indicate
that the door is locked.
At the end of the pyrolysis cycle, 0:00
flashes.
There is a 30 minute cooling phase
after each pyrolysis and your oven
remains unavailable during this time.
When the oven is cool, use a
damp cloth to remove the white
ashes. The oven is clean again and
ready for further cooking opera-
tions.
SELF CLEANING WITH DELAYED
START
Follow the instructions described in
the previous section.
- Select the end time symbol (delayed
start) and confirm.
- Set the pyrolysis end time you want
with the control knob and confirm twice.
After these steps, the oven switches
to standby and the start of pyrolysis
is delayed so that it finishes at the
programmed time.
When the pyrolysis is complete,
switch your oven off by pressing the
key.
29