Safety Precautions; General Safety Guidelines - HP PageWide XL Serie Einführende Informationen

constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
For some countries/regions a printed HP Limited Warranty is provided in the box. In
countries/regions where the warranty is not provided in printed format, you may request a
printed copy from http://www.hp.com/go/orderdocuments.
You can find the Declaration of Conformity by searching for BCLAA-2003 at
http://www.hp.eu/certificates.

Safety precautions

Before using your printer, read, understand, and follow these safety precautions, and your
local Environmental, Health, and Safety regulations.
You are expected to have the appropriate technical training and experience necessary to
be aware of hazards to which you may be exposed in performing a task, and take
appropriate measures to minimize the risks to yourself and to other people.
This equipment is not suitable for use in locations where children are likely to be present.
For any maintenance or part replacement, follow the instructions provided in HP
documentation to minimize safety risks and to avoid damaging the printer.

General safety guidelines

Follow the precautions at all times to ensure the proper use of the printer and prevent the
printer from being damaged.
There are no operator-serviceable parts inside the printer except those covered by HP's
Customer Self Repair program: see http://www.hp.com/go/selfrepair. Refer servicing of
other parts to qualified service personnel.
Do not repair or replace any part of the printer, or attempt any servicing, unless specifically
recommended in the user maintenance instructions or in published user repair
instructions that you understand and have the skills to carry out.
Do not attempt to repair, disassemble, or modify the printer yourself. Any such attempt
may result in electric shock, fire, problems with the printer, or injury.
Do not use any part other than original HP spare parts.
●
To repair or reinstall the printer, contact your nearest authorized service provider.
●
Turn off the printer and call your service representative in any of the following cases:
A power cord or plug is damaged.
●
The printer has been damaged by an impact.
●
There is any mechanical or enclosure damage.
●
Liquid has entered the printer.
●
There is smoke or an unusual smell coming from the printer.
●
The printer has been dropped.
●
The printer is not operating normally.
●
2 ENWW