Balluff BIS C-60 1 Serie Handbuch Seite 68

C60_1-023_819395_0508_en.p65
51
Example No. 11
Mixed Data Access
For configuring with
double bit header!
52
Example No. 12
Mixed Data Access
For configuring with
double bit header!
52 E
Function Description
Examples for protocol sequence
Read data carrier using Program No. 1 (data carrier type with 32 byte block size):
Host:
1.) Process subaddresses of the output buffer in the
order shown:
3.) Process subaddresses of the input buffer:
... A total of 27 bytes of data are exchanged.
For the remainder of the procedure, see Example 2 on
Dynamic mode is turned off while the Mixed Data Access program is being run.
Function Description
Examples for protocol sequence
Write data carrier using Program No. 1 (data carrier type with 32 byte block size):
Host:
1.) Process subaddresses of the output buffer in the
order shown:
3.) Process subaddresses of the output buffer:
... A total of 27 bytes of data are exchanged.
For the remainder of the procedure, see Example 7 on
Dynamic mode is turned off while the Mixed Data Access program is being run.
BIS C-60_1 Identification System:
2.) Process subaddresses of the input buffer in the
order shown:
4.) Process subaddresses of the input buffer:
38.
BIS C-60_1 Identification System:
2.) Process subaddresses of the input buffer in the
order shown:
4.) Process subaddresses of the output buffer:
44.
E 51