Scheppach HM140L Original Bedienungsanleitung Seite 26

3.
a)
common sense when operating a power tool.
cation.
b)
c) Prevent unintentional starting. Ensure the
d)
left attached to a rotating part of the power
e) Do not overreach. Keep proper footing and
balance at all times.
f)
or long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, en-
h)
4. Power tool use and care
Do not force the power tool. Use the correct
Do not use the power tool if the switch does
Disconnect the plug from the power source
justments, changing accessories, or storing
power tools.
26 |
www.scheppach.com /
-
-
-
-
-
-
-
service@scheppach.com /
Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper-
ate the power tool.
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
damaged, have the power tool repaired before
use.
Keep cutting tools sharp and clean.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
clean and free from oil and grease.
5. Service
ment parts.
Warning!
a) Mitre saws are intended to cut wood or wood-
rial such as bars, rods, studs, etc.
+(49)-08223-4002-99 / +(49)-08223-4002-58
-
-
-
-
-
-
-
-
-