Adjusting The Equalizer Curve; Eq7 Tune; Adjusting Unit Menu Items; System Menu - Sony mex-r1 Bedienungsanleitung

Adjusting the equalizer curve

— EQ7 Tune

You can adjust and store the equalizer settings
for different tone ranges.
OFF
SRC MODE
TOP MENU
SOUND
ENTER
SETUP
SYSTEM LIST
SYSTEM
MENU
MENU
PICTURE
Z × Z
EQ
AUDIO SUBTITLE
1
Select a source, then press

(SYSTEM MENU).

2
Press M/m repeatedly until "EQ7
TUNE" appears, then press (ENTER).
3
Press </, repeatedly to select the
desired equalizer type, then press
(ENTER).
4
Press </, repeatedly to select the
desired frequency.
The frequency changes as follows:
62Hz y 157Hz y 396Hz y 1kHz y
2.5kHz y 6.3kHz y 16kHz
5
Press M/m repeatedly to adjust the
desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 4 and 5 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (ENTER).
6
Press (ENTER).
The setting is complete and the display
returns to normal play/reception mode.
ATT DVD
+
MENU
M/m
ENTER
–
</,
DSO EQ7
ANGLE
AF

Adjusting unit menu items

— SYSTEM MENU
OFF
SRC MODE
TOP MENU
SOUND
ENTER
SETUP
SYSTEM LIST
SYSTEM
MENU
MENU
PICTURE
Z × Z
EQ
AUDIO SUBTITLE
1
Press (SYSTEM MENU).
2
Press M/m repeatedly until the desired
item appears.
3
Press </, to select the desired
setting (example: "ON" or "OFF").
4
Press (ENTER).
The setting is complete and the display
returns to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
Tip
You can easily switch among categories by pressing
and holding M/m.
continue to next page t
ATT DVD
+
MENU
M/m
ENTER
–
</,
DSO EQ7
ANGLE
AF
37