Troubleshooting - Scheppach HL1800G Original Anleitungen

14 Troubleshooting

In case of any malfunctions not mentioned here, contact your dealer's after-sales service.
Malfunction Possible cause
The blade does not Drive shaft speed incorrect
move downwards or
Drive shaft rotating in wrong direction
reach its splitting force
Low oil level
One of the levers not connected
Dirt in the rails
Maintenance and repairs
All servicing jobs must be executed by specialized personnel under strict observation of the present operating instructions.
Disconnect the machine from the drive shaft before undertaking any maintenance work. Attach a board to the ma-
chine explaining the reason for being out of order: "Machine out of order due to servicing work: Unauthorized people must
not come close to the machine or switch it on."
Remedy
Check drive shaft speed
Check and adjust the direction of rotation
Check oil level and refill
Check fixing of lever
Clean the rails
GB 33